Can a Wood Saw Blade Cut Aluminum?

Power Tools Lab is reader supported. When you buy through links on our site we may earn an affiliate commission. Learn More 

Can a Wood Saw Blade Cut Aluminum?

The short answer is yes, wood saw blades can cut aluminum. In fact, it can easily cut through most other materials as well.

This is because the teeth on a wood saw blade are designed to be sharp and effective at slicing through wood.

So if you have a good quality blade with sharp teeth, then there are very few materials that will be safe from its cutting prowess!

Wood

can a wood saw blade cut aluminum

  • When it comes to choosing the right saw blade for the job
  • it’s important to consider the strength of the material you’re trying to cut.
  • Wood is a strong material but it can also be brittle in some cases, which is why it’s important to use a sharp and quality blade when cutting through it.

Aluminium

can a wood saw blade cut aluminum

  • Aluminum is a softer metal than steel so it’s easy for the wood saw blade to slice through it.
  • However, that doesn’t mean that all blades will be able to do the job.
  • In order to make sure that your blade is effective at cutting aluminum, it’s important to choose one that is sharp and specifically designed for metal.

How to Cut Aluminum with a Wood Saw Blade? Step By Step

You can cut aluminum with a wood saw blade, but it takes a little more effort than cutting other materials.

Safety First! (Wear PPEs)

can a wood saw blade cut aluminum

  • You should wear safety goggles and tight clothing.
  • Your clothes might get caught if you are too close to the blade when it moves.
  • Also, take off rings or other jewelry that might get caught on the blade.

Use Cutting Oil

can a wood saw blade cut aluminum

Cutting aluminum is dangerous. Oil will keep the saw from catching or grabbing the material and causing it to break. If this happens, people near you could get hit with pieces of metal flying at high speed.

  • To not damage the blade, you need to clamp the aluminum workpiece. Then you can cut it.
  • You need to use a low-viscosity cutting oil so the blade doesn’t get dirty. You can use WD-40 or kerosene or paint thinner.
  • The lubrication on the blade helps it from breaking. The lubricant also keeps the blade cooler so there is no overheating.
  • If you want to use this type of blade for cutting aluminum, then there are some steps that you should follow:

1. First

can a wood saw blade cut aluminum

  • make sure your saw is sharp and has the right type of blade for dealing with such material (there aren’t many types designed especially for cutting aluminum!)

2. Second

can a wood saw blade cut aluminum

  • Start by using the crosscut saw’s 45 degree angle to create several perpendicular cuts into one side of the lump or sheet of metal until the teeth on the corners start showing up through one side.
  • This means that they’ve punched through to create divisions between adjacent pieces of metal or lumps on either side.  
  • This will make the cutting process much easier as it’ll help to avoid bending the blade.

3. Third

can a wood saw blade cut aluminum

  • use the rip saw at a 90 degree angle to go down the length of the cut that you’ve just created 
  • make sure you keep the saw level!

4. Finally

  • use the crosscut saw to go back over the same cut in the opposite direction, making sure to keep the saw at a 90 degree angle to the material.

If you follow these simple steps then you should be able to easily cut aluminum using a wood saw blade! Just make sure that you have the right type of blade for the job, and that it’s sharp enough to do the job properly.

Care and Maintenance for Wood Saw Blades

Once you have the right blade for the job, it’s important to take care of it in order to ensure that it stays sharp and effective. Here are a few tips for taking care of your wood saw blade:

  •  Clean your blade after each use with a dry cloth. This will help remove any debris or sap that may have accumulated during the cutting process.
  • Store your blade in a safe place when not in use. Make sure it’s out of reach of children and pets to avoid any accidents.
  • Keep your blade sharp by using a sharpening stone on a regular basis. This will help to maintain the cutting power of the teeth and prevent them from becoming dull over time.

 By following these simple tips for taking care of your wood saw blade, you can keep it in great working condition for much longer. Remember, the higher the quality of your blade, the easier it will be to maintain!

Tips to Extend the Life of Your Wood Saw Blade

Here are a few tips for taking care of your wood saw blade in order to prolong the life of the blade and ensure it remains sharp enough for any job.

1. Clean Your Blade

  • After Each Use with a Dry Cloth, The first step to take after using your blade is to wipe it down with a dry cloth.
  • This will remove any debris or oil from your hands that could have left a residue on the blade while cutting.
  • Wiping off the blade at this point can help preserve its cutting power and prevent rusting, too!

2. Store Your Blade

  • in a Safe Place When Not in Use It’s important that you store your blade somewhere where it can’t be easily damaged by other objects or by being knocked off the workbench.
  • A good place to store it is in a blade case or box, which will protect it from damage and keep it sharp.

3. Keep Your Blade Sharp

  • by Regularly Using a Sharpening Stone One of the best ways to keep your blade sharp is by using a sharpening stone on a regular basis.
  • This will help to maintain the cutting power of the teeth and prevent them from becoming dull over time.

A sharp blade will be able to slice through wood much more easily, which is why it’s important that you keep your blade in good condition at all times.

The Importance of Saw Blades

 A saw blade is an important part of any saw. It’s what allows the saw to cut through whatever material you’re trying to cut.

There are all sorts of different saw blades available on the market, each designed for a specific type of material. So it’s important to make sure you have the right blade for the job.

The Strength of Wood

Wood is actually quite a strong material, which is why it’s used in construction so often. However, it’s also brittle in some cases, which is why you need a sharp blade to cut through it.

If you try to use a dull blade or a blade that’s not suited for the material, you’ll quickly find that the wood will shatter and crack.

The Cutting Power of a Wood Saw Blade

A good quality wood saw blade can easily cut through aluminum. In fact, it will have no problem cutting through most other materials as well.

This is because the teeth on a wood saw blade are designed to be sharp and effective at slicing through wood. So if you have a good quality blade with sharp teeth, then there are very few materials that will be safe from its cutting prowess!

Types of Saw Blades

The most common types of saw blades are:

  • crosscut saws
  • rip saws

rip saw

  • is a type of saw that works by pushing a large number of teeth in a set into material in order to cut it.

Crosscut saw

  • on the other hand, have teeth on both sides. The difference between these two types of saw blades is the angle from which they cut through the material being cut.

 Crosscut blades work best with perpendicular cuts, while rip blades work with angled cuts

can a wood saw blade cut aluminum

Lynx 5' Two Man Crosscut Saw

Our Rating

4.5/5

can a wood saw blade cut aluminum

Crown 190 24-Inch Rip Saw with 4.5 TPI

Our Rating

4.5/5

Wood Blade on Aluminum

The size of the blade’s teeth is crucial. The smoother the cut, the more teeth (higher TPI) on the blade. Lower TPI blades have bigger gullets and deeper teeth. These will grab the aluminum channels’ edges and draw the workpiece toward the blade.

If you are cutting aluminum that is less than 1/16th of an inch thick, a blade with more than 10 teeth for each inch diameter is required. This implies a 12-inch miter saw would require a 120 tooth blade.

  • The number of teeth per inch is a metric to measure the thickness of the wood. There are 12 points on each blade, and they’re all equidistant from one another. This means there are 120 (TPI) x 12 (blade diameter in inches) = 120 teeth on each blade.

Many companies make blades with 200 teeth on them, for this reason.

You’ll need a blade with 10 per diameter inch teeth if the aluminum is thicker, for example by 1/8th of an inch. For 1/4th of an inch thickness, the number of teeth is cut down to 8 for each diameter inch. The maximum tooth count for any aluminum thicker than a quarter inch is 6 per inch.

FAQs

Some other types of materials that can be cut by a wood saw blade include plastic, drywall, and fiberglass. Always be sure to read the manufacturer's guidelines to make sure that the saw blade is compatible with the material you're trying to cut.

Yes, but it depends on the type of wood saw blade you're using. A good quality metal-cutting blade will be able to slice through aluminum without too much trouble, but if you want your wood saw blade to actually cut into aluminum then you'll need a specific metal-cutting blade.

Other materials you might want to cut with your wood saw blade include aluminum, plastic, PVC piping, or any type of soft material.

 

You could also use it for cutting through sheetrock in order to make openings in the material.

 

Wood is actually quite strong, but it's also brittle in some cases. It depends on the type of wood.

 

So if you have a good quality blade with sharp teeth, then there are very few materials that will be safe from its cutting prowess!

 

If you want to cut metal with a wood saw blade, then make sure you have a metal-cutting blade.

 

But why are most wood saw blades designed to chip or break when they come into contact with hard surfaces? Well, it's because chipping makes the cutting process much easier for most types of wood!

 

By allowing the blade to tear through an object rather than forcing it down on the material, the teeth are able to cut more efficiently.

In terms of chipping, wood has a major advantage over other materials such as metal.

 

Since wood is relatively softer than harder metals like aluminum and steel, it's much easier for wood saw blades to chip as they can tear or rip through the material.

 

In fact, the teeth on a wood saw blade is specifically designed to do this in order to make the cutting process easier.

Wood saw blades have an edge over other types of blades when it comes to cutting, but they're also much easier to take care of than many other types of blades.

 

They're lightweight and much less likely to become damaged or to require sharpening, as they can usually cut through most types of wood without becoming blunt.

Facts

Wood is a highly durable material, but it’s not so strong in all cases. There are some types of wood that can’t be cut with just any saw blade.

For example, balsa and cedar trees have hard and soft varieties respectively, and both can be easily penetrated by a regular wood saw blade.

Pine tree wood on the other hand is much harder to cut through than these two examples which means you’ll need to invest in an industrial-grade blade if you want to tackle this type of project!

You would think that wood can’t cut other materials like metal, but you’d be surprised. If you have a good quality blade made of the right material, then very few things will break it.

Wood saw blades are tools used to cut trees. They can even cut some types of plastic. If you have a saw blade, go to the recycling center and use it.

You’ll be surprised at how easily this difficult material is cut through if you cut through some aluminum cans or plastic bottles. The key to cutting anything is to score the surface, which is what we’re going to do in this section of the project.

Conclusion

Wood is a strong material, but it can be brittle depending on the type of wood. Luckily for you, there are few materials that will withstand being cut by a high-quality saw blade with sharp teeth.

If you have been struggling to drive traffic or sell your products online, consider using these neuroscience sales tips and see if they help get more prospects into your marketing funnel and convert them into customers!

Let us know how we can help make this happen for you.

I hope Can a Wood Saw Blade Cut Aluminum guide will serve as a quick reference. IF you like this article hit the newsletter/subscribe button to see our new posts about tools and share it with your friends, also gives back your feedback if you like or dislike anything in the comments section. 
thank you.

Did I Miss Anything?

Now i'd like to hear from you:

Please let me know I miss anything Or Maybe I didn’t mention!

Leave a Comment

×

Table of Contents