Can You Cut Plasterboard with A Jigsaw?

Power Tools Lab is reader supported. When you buy through links on our site we may earn an affiliate commission. Learn More

When you are starting a new project, it is good to learn about the jigsaw. It is one of the most important tools in your workshop.

It is easy to cut things with a jigsaw. The blade cuts on the upstroke. It removes less material than other blades so it is good for cutting plasterboard and other types of panels.

This tool is good for making joints and curves in plasterboard. You need to have a round-pointed blade handy before you start your project. These blades work best on smaller, tighter corners.

The teeth on this type of blade are finer than others so they’re good for doing small work. The saw is also good when you need to cut something that’s too tall or wide. You should have lots of blades because these can wear down quickly when cutting through plasterboard.

1. Why Is a Jigsaw the Best Tool for Cutting Plasterboard?

Can You Cut Plasterboard with A Jigsaw

A jigsaw is the best tool for cutting plasterboard because it produces a clean cut.

The saw blade can be tilted in any direction to enable it to cut through material that is not flat.

When you are finishing your project, the jigsaw is also ideal for doing the final sanding on edges.

2. What Are Some Benefits of Using a Jigsaw?

Can You Cut Plasterboard with A Jigsaw

When you use a jigsaw, you are able to use one tool to complete many different pieces of work. You can make curved cuts with a jigsaw very easily and cleanly, which is not possible with an ordinary handsaw or circular saw blade. Using a jigsaw can save you time and money because there are only one set of blades to purchase and you do not have to purchase different types of blades for different materials.

3. how To Use a Jigsaw to Cut Pieces of Plasterboard

that Are Too Tall or Wide for Your Saw’s Blade Reach?

If you’re ever faced with a situation where the piece of plasterboard you need to cut is too tall or wide for your saw’s blade reach, don’t worry all is not lost! You can use a jigsaw to easily cut these pieces.

All you need to do is follow these simple steps:

  • Measure and mark the desired cutting line on the plasterboard sheet.

Can You Cut Plasterboard with A Jigsaw

  • Drill a hole at each end of the marked cutting line. Make sure the holes are big enough for the jigsaw blade to fit through.

Can You Cut Plasterboard with A Jigsaw

  • Insert the blade into one of the drilled holes, and hold the sheet against the fence of the saw.
  • Use the jigsaw to slowly cut along the marked cutting line.

Can You Cut Plasterboard with A Jigsaw

  • Repeat the process at the other end of the cutting line, so that you cut deep enough to form a “pocket”.
  • Slide the blade into the newly formed pocket and continue cutting to create your desired shape or size piece of plasterboard sheeting.

4. What Tools Do You Need to Have Before You Start Your Project?

Before you start a new home or renovation project, be sure to check whether or not you have all the right tools for the job. If you plan on cutting plasterboard with a jigsaw, be sure that both of these tools are at hand:

A Pencil and Sharpie 

Can You Cut Plasterboard with A Jigsaw

  • for marking the cutting line on the plasterboard sheet

A drill and drill bit 

Can You Cut Plasterboard with A Jigsaw

  • for drilling holes at each end of the marked cutting line

A jigsaw 

Can You Cut Plasterboard with A Jigsaw

  • with a blade that is appropriate for cutting plasterboard

Safety Goggles and Gloves 

Can You Cut Plasterboard with A Jigsaw

  • always wear safety goggles and gloves when using power tools!

Having these tools on hand will make your job a lot easier, and ensure that the finished product looks great. So be sure to stock up before you start your project!*

5. What Are Some Tips for Beginners Who Want to Use a Jigsaw?

If this is your first time using a jigsaw, there are a few things you should keep in mind:

  • 1. Always wear safety goggles and gloves when using power tools!
  • 2. Use a pencil to draw the cutting line on the plasterboard sheet, so that your marks will be easy to remove later with an eraser.
  • 3. Make sure to cut slowly and carefully – jigsaws can be dangerous if you’re not careful.
  • 4. Always cut towards the fence of the saw, never away from it. This will help to keep the blade in control and minimize the chances of kickback.
  • 5. If possible, try to use a scrap piece of plasterboard as a guide when cutting. This will help you to achieve a straighter cutting line.

5. Alternatives to using a jigsaw?

If you can’t find, borrow or afford a jigsaw for your home project, there are several other tools that you could use instead:

A Strong Pair of Tin Snips

Can You Cut Plasterboard with A Jigsaw

  • These are good for cutting thin sheet material, but it takes some practice to master them! It’s best to cut against the baseplate of the snips instead of using all your strength to cut in one go.

A hand saw 

Can You Cut Plasterboard with A Jigsaw

  • A hand saw is a slower way to cut plasterboard, but it’s a good option if you don’t have access to any other tools.

Our Recommended Picks

Can You Cut Plasterboard with A Jigsaw

Milwaukee M18 Fuel D-Handle Jig Saw

Our Rating

4.5/5

Can You Cut Plasterboard with A Jigsaw

BLACK+DECKER Jig Saw

Our Rating

4.5/5

6. How To Use a Jigsaw if You’re Just Starting out On a New Home Project:

  • Get to know your jigsaw: Read the instruction manual and become familiar with how your jigsaw works.
  • Choose the right blade: Make sure to choose the right blade for the type of material you’re cutting. A fine-tooth blade is best for cutting plasterboard.
  • Cut slowly and steadily: Avoid pressing too hard on the jigsaw and make sure to keep a firm grip on it. Cutting slowly and steadily will ensure a clean cut.
  • Keep the material in place: Use clamps or a straight edge to keep the material in place while you’re cutting it. This will help to prevent accidents and ensure a clean cut.
  • Wear safety goggles: Always wear safety goggles when using a jigsaw, as there is a chance of debris flying up towards your face.

By following these tips, you’ll be able to use your jigsaw to cut plasterboard like a pro! So get out your jigsaw and get to work on your next home project. Happy cutting!

FAQs

The jigsaw is the best tool for cutting plasterboard because it has a small blade and is easy to maneuver.

You can use a jigsaw to cut pieces of plasterboard that are too tall or wide for your saw's blade reach by making a series of small, consecutive cuts. Then you can break the piece off and finish sawing it with your jigsaw.

Conclusion

Hopefully these tips will help you get started on your next home project! Remember that using a jigsaw is the best way to cut plasterboard, but if you don’t have one, there are several other tools that you can use as well. So don’t let that stop you from starting your project today!

I Hope Can You Cut Plasterboard with A Jigsaw Guide Will Serve as A Quick Reference. if You Like This Article Hit the Newsletter/subscribe Button to See Our New Posts About Tools and Share It with Your Friends, Also Gives Back Your Feedback if You Like or Dislike Anything in The Comments Section. 
Thank You.

Did I Miss Anything?

Now i'd like to hear from you:

Please let me know I miss anything Or Maybe I didn’t mention!

Leave a Comment

×

Table of Contents