Can You Drill Concrete Without Hammer Drill? 10 Steps Learning!

Power Tools Lab is reader supported. When you buy through links on our site we may earn an affiliate commission. Learn More

Can You Drill Concrete Without Hammer Drill?

Drilling into concrete is done with no hammer drill but is more difficult and a little slower than hammer drilling does.

Drilling in concrete is simpler than drilling directly in concrete but can be less complicated to do so with no drill.

Get Started

drill concrete without hammer drill

Before you start be sure of having some different size of masonry parts available.

This is because you will have to start with small holes and then create big holes with different bits.

You are probably able to get a replacement piece and maybe two for the types that typically work with you.

However as long as you have quick access to local hardware or other home repair stores you can simply find whatever you need.

Step 1

Get Several Masonry Drill Bits With Different Sizes On Hand.

drill concrete without hammer drill

A regular drill isn’t as strong in breaking through concrete as a hammer drilled. Then you gotta start with the smaller drilling bits as you increase your skill levels. It would be best that you had many different diameter masonry drill tools on hand before you start.

Step 2

Measure And Mark The Locations Of Holes.

drill concrete without hammer drill

  • Take a measuring tape and a pencil to mark the place in the hole you plan on drilling. You must measure and mark the area of the holes depending on the intended use of the hole.
  • Hold a shelving unit, artwork, wall mounts or various forms of montage directly above the marks. If you want to see the holes, press. Location of the hole: wait. It.
  • That’s where the hole is. You have to find out if your hole is a very accurate measurement. In this way you can get there. Correct drilling with holes at your locations. You need two Tape measure to test.

Step 3

Get Your Protective Gear.

drill concrete without hammer drill

  • Dust emanating from building is accompanied by airborne fluid called crystalline silica. Even inhaling the smoke can pose an hazard to the respiratory system.
  • An N95 respirator will be useful for drilling and cleanup processes as it filters airborne particles up to 95%.
  • This air is carried and causes severe lung problems like lung scars. Unless your job involves using a ladder, pick one with strong steps and make sure the legs rest on a solid surface.
  • Make sure you get to a position where you can exert considerable force on a tool while preserving good stability. I recommend using a ladder with a stable step and with solid.

Step 4

Start Drilling Slowly Using A Smaller Masonry Bit.

drill concrete without hammer drill

  • Start drilling gradually and without pressing too hard so the drillbit can make its work easier on the brick.
  • For the start, we recommend a smaller masonry bit with a sharper tip to penetrate the concrete.
  • Starting slowly is critical to avoid having the drill get much heat and it’s likely that this makes the drill boring and corroded.
  • You should drill in quick bursts of time for avoid excessive heat. If you drill from an angle, you might cause mounting issues that can greatly influence the holding power of the shaft. If your drill is flat it should not become hot from being used.

Step 5

Have Water Or Lubricant Nearby.

drill concrete without hammer drill

  • Normal drills have no use for drilling in concrete for example. Drilling is done by rotating on a circular surface against the ground and produces a large amount of heat.
  • High friction or high heat can cause damage to the bore bit.
  • Apply water or grease to a drilling surface every day so the unit prevents overheating. Apply to the hole as well as on the drill to avoid overheating. Also apply water instantly on drill if the motor started sputtering.
  • Also add water immediately if it becomes hot. Add lubricating liquid both through hole to prevent excess friction.

Step 6

Clear The Blockages.

can you drill concrete without hammer drill

Image Credits: wikihow

  • Use the thumb of your dominant hand to force the trigger to the inmost section of the drill And then simultaneously apply a constantly steady amount pressure to the actual stone using the drill.
  • This step requires you to use your body strength to insert the drill as tightly around the mortar as possible. Never push your drill through too hard because you could damage your tool.
  • You may need to first remove any blockages that were formed in concrete by smashing a hammer and a nail. Keep holding the drill with both hands and hold a steady upward posture.

Step 7

Constantly Lift The Drill Out Of The Hole.

  • When digging bricks without using the drill head it is imperative that the drill be taken out of the hole regularly when drilling. The removal of dust and dirt in the hole is essential to clearing the flutes.
  • It also allows the drill to function at a faster speed and reduces friction. The. If you have an unusual speed you should move the part forward and back to get out of the hole. It’s a useful way to blast away sand from the hole.
  • The bit should be lifted forward and back to avoid clogging up of drill flutes in the bit so prevent the excess dust from clogging and causing friction, and create minimum friction.

Step 8

Have Your Wall Anchor Installed!

drill concrete without hammer drill

  • After drilling a number of holes to the brick it is now time to insert the wall anchors.
  • When utilizing robust screws ensure good assembly.
  • Use strong screw heads for longer life and easy maintenance.

Final Step

Remove Any Remaining Debris From The Work Area.

  • Use a shop vac (a kit with pre-filter is highly recommendable) to remove the dirt and grime from your floors. Wash and rinse the floors at worksites using a mop.
  • Take off your boots and blast off any remaining dust with compressed air. Take shower and wash everything immediately after cleaning. This would prevent them from spreading the silica dust all across your apartment.
  • Clean up the floor surface using a vacuum. Clean the floor. Remove debris from your job worksite with a broom or dustpan.

Power Tools Lab Top Picks!

drill concrete without hammer drill

Bosch 18V Compact 1/2" Drill/Driver Kit

Our Rating

4.5/5

Type of Drill Bits Required to Drill Into Concrete?

In concrete the types of pieces used are named masonry bits. These bits have a carbide tip that is powerful enough to drill in bricks and stones too. Sharper drilling is always recommended for all drilling jobs.

Here are several drills you should have in your toolbox which should suffice most time. The type of drill bits you can use are called masonry bit bits that can also be used in brick or stone.

Regardless a Hammer Drill Is the Best Option for Drilling.

Hammer drills are amazing tools you can use for many different types of tasks. The drill bit attached to the body does rotate but has also a back and forward motion exactly like a basic hammer.

This procedure is extremely fast, and the piece has moving motion back and forth several hundred more times a minute.

This lets you quickly drill down more difficult surface like brick, mortar or concrete.

Another great feature of this drill design is that it may be used for standard drilling too.

You can drill drilled in concrete with regular drill bits or with cement with regular drill bits. Using the hammer drill one will create holes in a hole through hammer action.

Hammer Drill vs. Regular Drill

drill concrete without hammer drill

Hammer Drills have additional characteristics in which the drill moves with extreme velocity and always goes in the field. This improves drilling efficiency and helps drill hard materials like concrete tile grout, granite marble, cement etc.

drill concrete without hammer drill

A normal drill does not carry a hammering feature described above. In theory you can still drill through concrete with an ordinary drill but it’s slow and inefficient.

The hammer drill work as a regular drill without any moving. The other are both purely identical and both have the same feature as standard drills. The drill may be switched off using a selected button.

Read More: Rotary Hammer Vs Hammer Drill?

What Else Can You Use to Drill Into Brick Besides a Drill?

The most common tool when drilling holes in brick is the hammer drill. Other software can offer the same results albeit at a much more slow rate.

In this guide, let’s concentrate on how to drill into the brick without the use of hammer.

You can also use concrete masonry drill bits as an alternative options to use the drill bits and the impact driver if this is within your reach. 

Related: 35 Different Types of drills?

How Do I Convert a Regular Drill Into a Hammer Drill?

  1. A standard drill can be converted to a Hammer Drill with the correct adapter.
  2. Your current drill should have a 3/8′ inch handle or greater and 12V or better.
  3. So the adjustor would actually work if the screw had been held onto the drill head and activated hammer action like a normal screw.
  4. It makes drilling in concrete masonry easier.
  5. Adapter can easily change the. The present hole is. Hammer drill easier to find in concrete or bricks.
  6. Masonry use of adapter is the right solution for sp.

Diamond Core Bits

can you drill concrete without hammer drill

Diamond core bits grind quickly and evenly across concrete and rebar. Do not use diamond core bit in hammering action as it causes cutting edges to be damaged.

An arbor is recommended for use with tungsten carbide or diamond carbide drill bits.

Use a drill rated at 850W or higher for maximum effect. It also needs protection clutches. Unlike a coring bit diamonds it grinds a little bit.

Concrete bars and rebar are firmly used easily if required. In both cases an arbor should be used using either a diamond core or tungstst carbide bit.

Carbide Core Bits

can you drill concrete without hammer drill

The Tungsten carbide core is extremely brittle. Carbide ends are secured to the steel body to make it durable and flexible while holding the cutting tip hard.

This makes it very easier for you to punch through masonry without using a drill. The downside of carbide hole cutting is that on impact the carbide tips of the rim often get chipped.

You can even use them in regular drills with a rotary hammer or even just regular drills. More information about carbide holes can be found here.

Importance of Masonry Bits

can you drill concrete without hammer drill

Always use Masonry Tools from brands with well known quality. This is since masonry can quickly split up poor grade pieces.

This not only damages masonry when your drill but it presents some risk of the bit breaking and decomposing.

Look for cracks or damage either on the drilled part or buried area. If the bit was damaged or worn out immediately, change it out.

Also fracturing the brick may cause small bits of the brick to fall out which can easily strike you or any people nearby. Please make use of masonry.

A Selection of Different Size Masonry Drill Bits

By making any regular drill bits, you might rip and break drill bits and leave no holes in your concrete.

Standard drill bits are typically not strong enough or dense sufficient to tackle heavier and tough material like concrete.

It is therefore essential that you choose the correct drilling tool for your particular work. Masonry drill bits also have two advantages comparing to standard drill bits. Small drill holes for small parts.

A Regular Drill with Adjustable Speed and Torque Settings

A changeable head which allows use of different drill parts are needed. It gives an extra flexibility when dealing with other masonry jobs such as drilling brick, concrete. When you must use regular drills, you should use variable torque and speed.

For drilling into cement without hammer drill you can’t use a standard drill bit. For example, you’d need to finish the job quicker to ensure you don’t damage the drill bit in most cases.

On concrete drilling bit you may need to adjust this speed. Torque settings to save damage to the drill bit. For further information please visit [link].

Do’s

Keep the drill bit in the hole when drilling. This allows the drilling bit to work harder and cause less friction. By doing this you’ll remove dust.

Don’ts

We don’t use hammer drills for this project so we didn’t want to treat it like an hammer drill.

When you use the drill without a hitch you’ll have a large risk. Rather often release the drill from the hole and remove the material as described in the section Do of this project.

Using a drill press you have to remove the drill bit from the hole and avoid damaged bits, not only but also damage the drill itself.

The Do sections represent the sections used by us in this project and the section do.

What Are Concrete Bricks Made Of?

A Hammer Drill will work forwards and backwards during drilling in bricks concrete and stones and other hard surfaces.

Concrete brick is generally made from sand which is strongly attached.

This type of drill seems to be the best tool for this job of drilling holes through concrete brick or concrete. 

Final Thoughts

Using cement or masonry drill bits is the perfect way to drill directly through brick wall with no hammer. It is possible to drill into hard masonry.

The processes involve pounding, flushing, drilling and cooling. It’s certainly an easy job, but the process may be more slow than using Hammer drills.

But if someone asks you how you can drill the bricks without a drill say you can’t achieve it with one drill. See also link below.

I hope this guide will serve as a quick reference. IF you like this article hit the newsletter/subscribe button to see our new posts about earbuds and share it with your friends, also gives back your feedback if you like or dislike anything in the comments section. 
thank you.

Did I Miss Anything?

Now i'd like to hear from you:

Please let me know I miss anything Or Maybe I didn’t mention!

Leave a Comment

×

Table of Contents