Can You Hammer a Screw?

Power Tools Lab is reader supported. When you buy through links on our site we may earn an affiliate commission. Learn More & Image Credits: Rustic David

I remember when I first learned how to hammer a screw. It was my dad who taught me, and he didn’t use any of the fancy power tools that are on the market today.

He had an old-school style approach to construction that made me feel like I was more in touch with what it means to build something.

if you’re one of those people who likes the idea of traditional woodworking techniques, this is for you!

 There’s no need for expensive equipment or hard-to-find pieces; all you need is some patience and determination (and maybe a few more screws).

So get out there and start building your own world with these six steps:

  • Find a suitable piece of lumber

can you hammer a screw

  • Drill holes where necessary

can you hammer a screw

  • Hammer screws in with a rubber mallet

can you hammer a screw

  • Tighten the screws

can you hammer a screw

  • Sand it down

can you hammer a screw

  • Apply stain or paint

can you hammer a screw

When you’re finished, you’ll have something that looks good and will probably last for centuries! If only the same could be said about all of my other projects…

1. How To Use a Screwdriver?

Wedge the end of the screwdriver into the slot at the side of the screw. Use your other hand to turn the screwdriver clockwise (or counterclockwise if it’s a right-handed screw).

You will feel resistance as you bring the blade of the screwdriver around to meet the head of the screw.

Once you have completed one turn, repeat this process on adjacent slots.

Continue until you feel that further rotation will lead to more than just loosening or breaking off some pieces of metal.

2. Uses for The Screwdriver.

The most common use for the ordinary flat-bladed screwdriver is to tighten up and loosen screws, whether they’re on a desk lamp or a bicycle.

It’s also used to help remove old screws and bolts. The Phillips head screwdriver can do much more than that.

however! When it has a straight blade instead of the cross-shaped one, you can use it as a pry bar or as an awl.

3. Why You Should Buy One Today!!

Ever been nailing a screw, and have it just not go in? Maybe it’s because you’re hitting the wrong side of the nail.

There are two major types of nails: flat-head and driven. Flat-head nails are typically driven into wood or other surfaces where the nail is going to stay for a long time.

Driven nails may have a head that’s either round or pointed driven nails can be driven flush with a surface or hammered below surface level.

Wondering why you should care about this? Well, if you’re using a hammer, a driven nail will stick out more from the surface of the wood, making it easier for you to hit.

A flat-head nail will be recessed into the wood more, and will require you to hit it on an angle.

4. Where to Find the Best Deals on Them?

If you’re looking for quality and fair prices when it comes to purchasing screwdrivers, you can find them at Harbor Freight Tools and amazon.

can you hammer a screw

Magnetic Screwdrivers Set with Case

Our Rating

4.5/5

can you hammer a screw

GEARWRENCH 5 Pc. Hammer and Mallet Set

Our Rating

4.5/5

5. The Benefits of Owning One

Standard benefits:

  • Save time and energy.
  • More convenience.

Emotional benefits:

  • Be a more efficient builder.

6. Tips and Tricks

for Using Your New Screwdriver! (e.G., how To Remove Screws, how To Tighten Loose Screws)

So now that you have your brand-new screwdriver, it’s time to put it to good use! Here are a few tips for getting the most out of your new tool:

  • Don’t use the screwdriver as an extension cord! Remember that the head of the screwdriver is designed to fit in the slot on the screw. The blade will not help you much if you’re trying to hammer in a screw.
  • Get ready for tight spots by using both hands. If you’re working with a stripped or rusty screw, make sure that you don’t give up by choosing a different screwdriver.

Conclusion

In the world of traditional woodworking, there’s no need for expensive equipment or hard-to-find pieces; all you need is some patience and determination (and maybe a few more screws).

So get out there and start building your own world with these six steps: Find a suitable piece of lumber, drill holes where necessary, hammer in screws with a rubber mallet, tighten the screws by hand or screwdriver if needed.

When you’re finished, you’ll have something that looks good and will probably last for centuries! If only the same could be said about all of my other projects…

I hope can you hammer a screw guide will serve as a quick reference. IF you like this article hit the newsletter/subscribe button to see our new posts about tools and share it with your friends, also gives back your feedback if you like or dislike anything in the comments section. 
thank you.

Did I Miss Anything?

Now i'd like to hear from you:

Please let me know I miss anything Or Maybe I didn’t mention!

Leave a Comment

×

Table of Contents