Can You Use An Orbital Sander On Drywall?

Power Tools Lab is reader supported. When you buy through links on our site we may earn an affiliate commission. Learn More

Can You Use An Orbital Sander On Drywall?

A lot of people have a misconception about what an orbital sander does. They think that it’s just for smoothing out the surface of the the drywall, but in reality, it can be used to remove any paint or varnish from a wall.

If you’re going to use one, there are some precautions you’ll need to take first.

1. Safety First

  • First, make sure that the room is well-evacuated and closed off from other people in the house when using this type of machine!
  • Second, wear old clothes when using an orbital sander because they produce enough dust and spray that will get into everything if you wear anything too nice.
  • Lastly, apply plastering powder over the entire area where you want to sand in order to prevent splatter and dust from getting into everything in the room.

Remember that! when using an orbital sander, it is important for safety reasons not to wear anything but old clothes – the machine produces enough dust and spray that will get into everything if you wear anything too nice.

  • Make sure that the room is well-evacuated and closed off from other people in the house when using this type of machine.
  • Lastly, apply plastering powder over the entire area in order to prevent splatter and dust from getting into everything in the room.

2. Intro

Orbital sanders are a tool that you should use when you do home improvement projects. Lightweight and easy to use, they can remove materials and also smooth surfaces. They have many practical uses!

An orbital sander is a good tool to use on small drywall projects. But for larger or more difficult ones, other tools are better as well as you can use to fill in small drywall gaps.

An orbital sander can be used on drywall. Be careful, though, because it might damage the surface of the drywall.

If your project is bigger than you planned, or if you need a smooth finish for it, there are many tools that can help.

  • So, using an orbital sander will help you with things like smoothing surfaces.
  • You can use it for small tasks like drywall. Other tools are needed for more surface, though.
  • Power tools like sanders work great for bigger jobs.
  • Your sander will not get the surface scratched up if you are careful!

3. How to use an orbital sander on drywall.

Do you want to do a project at home? You can use an orbital sander on drywall.

Don’t use tools when you are not careful. Sanders make it easy to fix drywall, but you need to be careful when using them.

Orbital sanders are a simple tool that many individuals may use without the aid of a specialist builder.

It is important to know how to use them in order to get good results:

  1. Always wear protective safety equipment such as goggles and dust masks
  2. Never hold or carry anything in your hand while using an orbital sander
  3. Keep children at least 10 feet away from the device
  4. Adjust speed to prevent slipping
  5. Apply downward pressure on the back of the sander, rather than pushing it forward.
  6. If paint or drywall dust accumulates on the sander, clean with compressed air to prevent motor burn-out
  7. Keep sanders free from obstructions like nails and screws
  8. Be sure to keep your orbital sander level As you can see, orbital sanders are easy to use.
  9. You can apply them simultaneously around the room for even results, using a back-and-forth motion.
  10. If you want to use an orbital sander, then it is best for small closed rooms.
  11. You should cover up any cracks where dust can get through and make sure there is a window or a box fan to get air circulating.

4. How rough should the sandpaper be?

Determine the sandpaper grit you’ll be working with. The more numerous the grains, the finer they will be.

The coarseness of the sandpaper is indicated by the grit number. The higher the grit number, the rougher it will be.

This guide from Amazon can help you pick out the ideal sandpaper for your project:

  • Finest Fineness 150-180 Grit Number (Range) Finest Use Fine150-180 Finishing or refinishing a surface Medium40-60 Removing paints/stains from many surfaces.
  • Coarse20-36 Removing an antiquated finish or smoothing a rough surface
  • There are multiple uses for each sandpaper grit. Choose a finer grit (between 150 and 180) to refinish the drywall; this will assist you avoid harm to the wall.
  • After selecting the correct grit level and bringing the sandpaper, insert it into the orbital sander.
  • Most sanders utilize a hook and look system to replace worn sandpaper pads.
  • To prevent the piece from rolling, align it properly with the base of the orbital sander.

5. Apply Light Pressure in a Slow, Circular Movement

  • These are the most crucial procedures for obtaining the best results when working with an orbital sander.
  • Keep the sander moving in circular motions with a light touch.
  • You don’t want to sit still while sanding since you risk burning out the sandpaper and damaging your material.
  • Don’t forget to take your time! Avoid rushing through any sanding job, especially if you want a smooth finish.
  • In random circular motions, go slowly for the ideal finish.

Prepare to be painted

The drywall will be smooth after the orbital sander is used.

  • When you’re finished using the orbital sander, hand sand any rough areas.
  • A clean drywall surface requires no disassembly of the compound, so there is no need to rush this step.
  • This will result in a smooth, consistent, and swirl-free drywall finish.
  • Sweep dust off the walls only after you’ve achieved your ideal finish.
  • The dust will help to bind the paint to the drywall’s compounds if you’re painting the drywall.
  • This can conceal any scratches or damage incurred while sanding.

6. The Best Drywall Sanding Tools for Various Applications

“Power Tools Lab Choice”

Bosch ROS20VSC Palm Sander

Can You Use An Orbital Sander On Drywall

 Check Price Click Here

(i). Electric Drywall Sander

An electric drywall sander was created especially for giant and difficult-to-reach drywall sanding tasks.

A drywall sander with an electric motor is ideal for large surfaces and lots of labor.

WEN 6369 Variable Speed 5 Amp Drywall Sander

Can You Use An Orbital Sander On Drywall

 Check Price Click Here

(ii). Portable Belt Sander

A belt sander is useful for sanding large sections of drywall (especially horizontally).

Makita Belt Sander

Can You Use An Orbital Sander On Drywall

Check Price Click Here

(iii). Portable Cable Sander

A portable cable sander is an excellent tool for tackling large-scale sanding tasks. Its long extension boom makes it easy to reach high walls and ceilings.

(iv).Drywall Hand Sander

Pole sanders and sanding blocks are one of the most cost-effective ways to sand drywall yourself, as they are a time-saving technique that does not require any special tools.

“Power Tools Lab Choice”

3M Drywall Hand Sander

Can You Use An Orbital Sander On Drywall

Check Price Click Here

Video Guide

Another wonderful resource is the equipment manual, which may also include instructional videos.


How to Reduce Dust While Sanding Drywall

Sanding drywall generates a lot of dust, both inconvenient and potentially harmful to one’s health. When sanding drywall, there are a number of techniques for eliminating extra dust.

Here are a few things you can do to keep dust from drywall sanding at bay:

  • To avoid any breathing difficulties, wear a dust mask or respirator while sanding drywall. Place a cloth on the ground or wrap plastic around it for simple cleanup.
  • Plastic sheeting and masking tape should be used to seal ducts and doorframes.
  • For ventilation, leave an open bottom crack in the door unplugged. A fan can y your new drywall
  • You’ll appreciate the results of a smooth, even finish after sanding.
  • After you’ve made use of all these techniques, follow up with a paint roller to get rid of any fingerprints and enjoy your newly refreshed walls!


Whether you’re sanding down one wall or the whole room, if you take some care while doing so, an orbital sander is possible.

I hope that the information in this post was beneficial to you!

Thank you for taking the time to read this.

I hope this guide will serve as a quick reference. IF you like this article hit the newsletter/subscribe button to see our new posts about earbuds and share it with your friends, also gives back your feedback if you like or dislike anything in the comments section. 
thank you.

Did I Miss Anything?

Now i'd like to hear from you:

Please let me know I miss anything Or Maybe I didn’t mention!

Leave a Comment


Table of Contents