35 Different Types Of Drills (And Their Uses)

Power Tools Lab is reader supported. When you buy through links on our site we may earn an affiliate commission. Learn More image credits: cifi.it

When you imagine a drill you might picture a drill that looks like a pistol with a screw-like end or even an older hand tool that resembles an egg beater.

There are 35 Different types of drills and different exercises with all the basic features. How many do you see? Have you tested a variety of drilling devices?

Types of power drills

What power drill is right for you? Choose amongst the following drill drivers and drill driver models. Typically every drill model has some features to make picking the best drill for your tasks more challenging.

Understanding Cordless Drill Batteries

Standard voltage and high voltage are appropriate applications – both domestic and DIY. The range covers from a four-volt charger to 28-volt units used on heavy tooling and machinery. A 1.3Ah lithium cell battery has a lifetime equal to twice the length of one in 1.5Ah.

The higher capacity also weighs twice as much so choosing fewer amps and getting spare batteries is a good choice if the weight of the tool is a problem.

Start any project with a full-charged battery in the drilling chamber and a backup battery in the charger. By doing so, you will never need two exhausted batteries at once.

1. Corded drill

different types of drills

Corded drills are powered by wire which is plugged into mains electricity. These electric cars tend to be more robust and can produce more torque.

The downside for corded drills is that you need to be near a power outlet to use one or if you need an extension wire to hold. These drills are shaped like pistols.

Therefore they are comfortable to carry with you and easy to use. There are several sizes and several drill pieces that attach for use to different types of jobs.

The drill bits may be used to drill in stubborn materials such as stuck surfaces or hard areas.

2. Cordless drill

different types of drills

It is very similar to the corded drill only there’s no cord. These run powered by rechargeable batteries making them portable.

The lack of being tied to this electric outlet will be particularly handy if you need to use this outdoors. The main issue with cordless drills is that they don’t run until the battery is charged.

Cordless drills also have a reputation of being very little more powerful than corded drills.

However, some manufacturers have developed techniques that make batteries as efficient as cordless drills. The reason being the use of two batteries to recharge the drill is very convenient.

3. Crank Drill

different types of drills

The crank drill has a high helix angle which allows it to drill deeply into tough materials. This also comes with sharp tips to improve cutting ability. It’s one of several manual tools you can use with ease to drill into hard metals like steel.

4. Hand Drill

different types of drills

Hand drills are incredibly good when used in fast jobs for which there is a need to put up a more expensive drill. They can be used with screws to drill holes in wooden, plastic, and hard metal pieces to get them.

5. Table Drill (without a press)

different types of drills

This general-purpose drilling machine provides you with a long and stable surface for work on your materials. Although its strength depends upon your strength it may not be suitable for strong drilling.

6. Post Drill

different types of drills

Hand-operated presses can bore holes into iron although the size and depth of this hole are determined by the operator’s strength. They get their name for being installed in posts.

7. Gimlet Drill

different types of drills

A gimlet drill is a manual drill handheld with a spiral-like head that starts and ends with points. This tool is great for starting holes in woodworking for screws and nails. They were designed to drill holes through the wood to ensure it was not split.

Gimlet machines are usually designed for use in harder materials such as softwood or cork because they are less known for power or strength. The corkscrew is a well-known kitchen tool that is typical of most homes. This is the cork screwer which is a popular kitchen gadget.

Learn more? Click here!

8. Dentist Drill

different types of drills

The small metal drills consist of small metal drills with the little bits sticking from the handles. The bit spins at a fast speed with most models between 8000 and 250,000 RPM. They emit a booming noise that could bring horror to a dental patient’s dear eye.

The jet has two functions; to cool down the drilling machine and help prevent overheating and also to wash off any debris in the work area. The drill is sprayed with water immediately before drilling for cooling down and removing soil debris from the drilling site.

Related: Can you drill marble?

9. Radial Drill

different types of drills

Radial drills are extremely strong and can also drill through the strongest metals. It’s a great tool for making holes in wood that is intended to be assembled to form furniture. The drill is fixed to the radial arm and the drill can be moveable to maintain a perfect line.

It makes drilling quite a few holes easier and faster since you won’t need to repeat or check the pitch. The radial drill is perfect to drill a series of holes in a precise straight line, in that precision is vital to ensure assembly goes smoothly.

10. Breast Drill

different types of drills

Use your weight to push down on the drill to increase downward strength. The rounded slits to the handle are perfect to suit the shape of your chest and knee. With the increased downforce it can bore holes into steel iron or hardwood.

For this reason, the plant is suitable for industries and blacksmithy shops. It’s named belly drill, knee drill, and chest drill but they’re also named belly drill and chest drill. It is similar in appearance and function to hand drills.

11. Air (Pneumatic) Drill

different types of drills

Air drills use compressed air so that they have to be pneumatic. Straight Air Drills have a drill head pointed right before it while Straight Air Drills are straight drills. Typically air drills include drills using jackhammers to break up the ground.

A pneumatic drill is driven with compressed air. Other than commercial and industrial operations, compressors are not frequently used.

Electronic and battery-powered drills are less common than electrical and battery-powered drills are. The dental and jackhammer drill are pneumatic machines.

The power from a compressor is strong and steady but it is not as common outside of commercial facilities such as industrial sites.

Air drills come in various sizes and also at different angles to be used with different kinds of drill bits, such as horizontal Air Drills with a drill hole facing downward – at an angle to the hand.

12. Push Drill

different types of drills

Hand-held drills increase precision for users giving more precise and delicate tools. The drill’s unimaginative name occurs because when you lift the handle the shaft rotates.

It closely resembles a screwdriver and is commonly used for minor jobs including dentistry and creating jewelry.

This appeal should not also be lost upon wood-workers, who value the ability of drills when they do complex projects.

13. Beam Drill

different types of drills

This tool has a sturdy wood base and a moving arm with a drill mounted vertically. The hole in the base can be clearly visible on a driller’s face.

They work with great efficiency and accurate precision for drilling holes in structural structures for structural integrity in buildings. This particular tool was shaped for the drilling of holes in beams as you would have guessed.

14. Brace Drill

different types of drills

A brace drill is a manual instrument with a U-shaped handle. The U-shape functions as a turning crank to provide greater power to the drilling rig.

Brace drills are typically used in woodwork that is widely used in carpentry workshops. They can be used with different drill bits depending on desired holes.

15. Impact Drills

different types of drills

Impact drilling machines suit heavy usage woodworking well. A typical impact drill does not hit the material unless you encounter resistance. They can make holes in tougher material as well. Nevertheless, they don’t really hold screws since they typically block fasteners.

16. Benchtop Drill Press

different types of drills

Benchtop drill presses are portable and easily transported to different sites as necessary. They are flexible since you can attach several pieces to them like hole saws.

So to make drill holes requires placing your material on the bench underneath the drill and lowering the drill bit on it to make holes in the process.

The drill bit is attached to overhead components. As shown below it has vertical lines downward which can allow drilling of holes in a drill press or workbench. 

17. Horizontal Drill Press

different types of drills

The heavier tool mounts onto the wall and is attached to the floor to ensure stability. The heads of drill heads are fixed horizontally so that the material has to be put forward to bore. The machine tool is powered by pedals that propel the drill forward and allow hands to hold the material around.

18. Bow Drill

different types of drills

The drill is the earliest tool usually associated with fire-making. It is a crossbow. The name comes from its appearance. The bow moves up or down the shaft of a drill, spinning it and forming flywheels at its base. It is mainly used to start a flame caused by friction caused by the friction of the moving parts.

But other woodworkers or dentists have changed them into drills that dentists and woodworkers can be used for drilling. The drill has been adapted as a work tool for woodwork and dentistry.

19. Ground Auger

different types of drills

A ground auger is essentially the advancing version of the ancient drilling that comprised a long and thick metal piece fixed to a horizontal hardwood ring with the shape of an alphabet T. Modern augers.

Several models use gas power for transferring motor power in the wrench motor rather than electric. It is ideal to remove dirt and dig holes more efficiently than using a shovel for the same purpose. The primary application of earth augers is to hole holes in the ground.

20. Eggbeater Hand Drills

different types of drills

The drills aren’t particularly powerful but they are precise that makes them an easy choice for many carpenters and modelmaker. It is operated by hand which rotates the gears by spinning its bit. The drill uses an exhilaration to the past to allow you to work with little margins.

It gives you greater control and the chance to cut delicate and precise holes in more flexible material and this is a drill to use. It’s not the strongest drill on earth but it works.

21. D-Handle Drill

different types of drillsThe D-handle drill is a rotary hammer drill with a unique handle. The use of D handgun drills can help enhance seizing control of your hands while reducing fatigue in your body.

The drills in this list also play a significant part in carpentry work and other construction jobs and home projects. Perhaps you want to build a safer home or perhaps you want to build shelving systems. If you’re looking for some exercise you can learn at home.

22. Straight Air Drill

different types of drills

This handheld tool is great for drilling into small or tight spaces where regular equipment cannot maneuver. It’s light and a little bit simpler than most simple tasks.

23. Combination drill

Also called combi drills this drill could function both as a drilling impact as well as a hammer. Combination holes are also used under difficult or light materials too. It makes a high-quality choice when you need both.

24. Reversible drills

different types of drills

This device rotates in clockwise and in anticlockwise directions. They are very quick to tighten and loosen screws for incredibly tight and secure applications.

25. Brace

The Brace was a hand drill designed largely for woodwork. Using this machine you can control the velocity and pressure and it produces clear and smooth holes. Watch the brace to admire its finesse and accuracy, and see below the video.

26. Traditional drills

This drill is very well suited to drilling holes and installing small fasteners in wood and drywall. When you’re trying to complete the project, one conventional drill is good enough. If you do more extensive drilling then standard drills may have more issues. Maybe a power-up drill.

27. Manual

different types of drills

Manual-operated drills are designed for smaller spaces or for woodworking projects that require some precision control. Manually motorized hand drills.

Some use a push motion, others are using a crank motion while others still use twist motion. Machine drill’s energy comes from your body muscle.

Manual drills change circular motion created physically into amplified torque to allow you to drill holes into tough materials.

Manual drills are less known than they were when they first were they require physical effort and they are valuable tools to carry around the home in an emergency. 

28. Portable drilling machines

Portable drilling tools and supplies are used to perform small to medium size drilling operations. They were very effective as it operates very fast. They may be used in several places including indoor and outdoor facilities. Handheld powered drills are also known as hand drills and power drills.

29. Sensitive drill machines

Sensitivity drilling machines are better known as drilling machines. They consist of a head of drills and drive mechanisms fixed to a rigid wall. They must be mounted to an aircraft before operation.

30. Right-Angle Drill

different types of drills

Right-angle drills are designed to drill holes and drive in tight places. This drill has a chuck mounted at an angle of 90 to the drill body.

31. Rotary Hammer Drill

different types of drills

Rotary hammers crush hard materials such as concrete, masonry, and brick. Some types include rotation-only, rotary, and blast-only modes. Should I be using software on various devices in the market?

You might find that the best drill is not the most accurate drill in your toolbox. It might be wise to invest and purchase the various type of power drills. In some cases, you may just choose one company or brand.

You don’t need to choose one brand with an everyday application so examine the variety offered to meet your needs and understand your needs.

32. Hammer Drill

A Hammer drill is comparable to a regular drill bit has a hammer if used to drill into the masonry wall. Hammers push the piece forward when rotating to make drilling harder on hard surfaces. The Hammer mode on most vehicles can be turned off for only drilling function.

33. Core Drill

different types of drills

Core drilling is basically a big motor, sometimes held in place by a frame holding the drill stationary throughout drills. It transforms a core bit into a cylindrical bit that creates a core the machine can easily remove rather than grinding up and out. The core drill will not apply to hammering or chipping applications.

Turn to Core drills once you’re having to drill massive gaps even in concrete. These tools may move slowly and sometimes it just takes time. Turn to core exercises if the work can’t be accomplished in a few seconds.

34. Mechanical Drill

It is a flexible drill – which can be used for both light and heavy use in any kind of environment.

35. Common Drills

There’s a good chance you’ve come across some of our drills. These are useful tools to carry out or in your shop.

Pin Chuck

On paper, the chucks are similar to push drills but much smaller. It primarily contains items that have a size anywhere from 2-5 mm. It primarily has been used in jeweling and watchmaking industries.

The size of this colostrum varies and often consists of three jaws. When you press the jaws on a collet, they are held by two jaws. This makes drilling much easier.

Powered drills

A motor-driven drill has a drive system powering the activities of its operators. It is far stronger for training and has no physical effort on your behalf. So they are suitable for both novice and professional people alike.

Other drills

In addition to these three basic drill types, there are a variety of other drills. Some, such as the brace, can be specialized. Others can fall into one of three main classes of drills but the characteristic they feature is distinctive.

Pin Chuck

different types of drills

On paper, the chucks are similar to push drills but much smaller. It primarily contains items that have a size anywhere from 2-5 mm. It primarily has been used in jeweling and watchmaking industries.

The size of this colostrum varies and often consists of three jaws. When you press the jaws on a collet, they are held by two jaws. This makes drilling much easier.

Uses

1. Use of a Hammer Drill

Hammer drilling machines are adjustable as the same model may be used on many types of materials. These tools are especially safe for concrete however often limited only to drilling holes of up to 1-inch width.

However, be careful that drilling through concrete produces silica particles that you may inhale. Use a face mask to protect yourself from any potential injury from silica particles in concrete drilling.

Hammer tools can be used also to drill a screw out with a hole or to remove a stuck screw.

2. Use of a core drill

Core drilling allows you to penetrate through concrete elegantly. Homeowners who are inspired by imagination use drills to make distinct artwork.

For instance, you can use a core drill to make holes in your garden wall or create massive openings in the concrete foundation so that you can install elegant marble and the like.

A core drill is necessary when you are breaking masonry without causing any problems during the process. I may use a core drill to drill holes i.

3. Use of a drill driver

The drill driver is your favorite tool for basic hole drilling. They can quickly perforate any solid material of varying softness. The driller helps make holes in the plastic, metal, and even concrete.

However, it is recommended that you keep in mind the power requirement for the drill driver when you use the tool on harder materials. There may also be a need to drill pilot holes.

4. Use of a Rotary Hammer Drill

Construction workers used these handheld machines often to smash stones and pound bricks. Rotary hammers also cut the asphalt masonry or any masonry bigger than 2 inches.

Using a rotary hammer for the house renovation can be the best tool available in this task. You can also use a drill to break down difficult materials such as concrete and asphalt.

5. Uses of an impact driver

Impact drivers are famous for their unmatched power to push screws into any object. They can be tightened and loosened in minutes and quickly install new screws.

Using the right bit inserted in an impact driver can be used for cutting holes in certain materials.

Alternately a combination kit provides a drill and impact driver which can remove the hassle of repeatedly switching out working parts.

You can also go for a combo kit using the drill or an impact driver which features both bits and drill.

Power Tools Lab Top Picks!

different types of drills

BOSCH 1-1/8-Inch SDS Rotary Hammer

Our Rating

4.5/5

Conclusion

To help you choose the best drill for your needs, we’ve assembled a list of 35 different types of drills and their uses.

We hope this information helps make your decision easier! If not, be sure to give us a call or fill out our contact form and we can chat about what might work best for you.

You deserve nothing but the best when it comes to tools that will keep you safe on-site after all, safety should always come first!

I hope 35 Different types of drills (and their uses) guide will serve as a quick reference. IF you like this article hit the newsletter/subscribe button to see our new posts about earbuds and share it with your friends, also gives back your feedback if you like or dislike anything in the comments section. 
thank you.

Did I Miss Anything?

Now i'd like to hear from you:

Please let me know I miss anything Or Maybe I didn’t mention!

Leave a Comment

×

Table of Contents